Page
Menu
News

Shock-absorbing boards

 
SQUARE SHOCK-ABSORBING BOARDS

 
 
CHARACTERISTICS
Hardness: Shore 60±5
Density: 1,10 g/cm3
Abrasion: 90 at 10 N
Diameter of opening in rubber: 50 mm (C)
Diameter of mounting hole in steel: 18 mm (D)
Block dimensions: 300×300, 500×500 mm
Colour: black

 

Wear resistant, damping, shock-absorbing square rubber blocks on steel basis; versions with/without mounting hole are available.

Use: receiving trays, hoppers, chutes, dump truck bodies.

SQUARE BOARDS   BLOCK DIMENSIONS  

BLOCK HEIGHT (A), xx

  STEEL THICKNESS (B)
  300 х 300 mm 500 х 500 mm    
Art. No.   509033хх 509053хх   15 , 20, 25 mm   3 mm
  509035хх 509055хх   30, 35, 40, 50, 55 mm   5 mm

 

  Information on SQUARE SHOCK-ABSORBING BOARDS

 

PP SHOCK-ABSORBING BOARDS

 

 

Rubber plates with steel base

Art. No.   DIMENSIONS   THICKNESS, хх
503150xx   500 mm × 1000 mm  

30, 40, 50,

60, 75, 80,

100 (xx:10),

125 (xx:12),

150 (xx:15) mm

503160xx   600 mm × 1000 mm  
503175xx   750 mm × 1000 mm  
503550xx   500 mm × 1500 mm  
503560xx   600 mm × 1500 mm  
503575xx   750 mm × 1500 mm  
503015xx   1500 mm × 2000 mm  

 

Toothed profile rubber plates

Art. No.   DIMENSIONS   THICKNESS
50515080   500 mm × 1000 mm   80 mm
50516080   600 mm × 1000 mm   80 mm
50557580   750 mm × 1500 mm   80 mm

 

Rectangular boards from high-quality wear-resistant rubber. Developed especially in the form of module blocks for easy and quick replacement of worn protection elements of hoppers and dump truck bodies. For quick and reliable mounting of elements to the surface to be protected, plates may be provided with a metal base. PP shock-absorbing boards are made from high-quality wear-resistant rubber and belong to the class of materials developed especially for mines and ore-dressing sector. Due to a high degree of wear resistance, they have a long service life, which ensures high performance, wear protection of production systems, and saving of time and maintenance costs. Simple in mounting and handling, they help greatly reduce the level of noise and vibration as compared to steel protective sheets. They are made of rubber which is resistant to water with any pH level and most oils in small concentrations, but should not be exposed to temperatures above 70 °С for a long time. The service life of a rubber coated dump truck body is multiplied by 8, and the cost of 1 new body and motor vehicle downtime for body repair exceeds the price of a protection set by ten times. Add to this a better preservation of axles, bearings and tyres thanks to the damping properties of rubber, and the use of shock-absorbing rubber boards will become an undeniable advantage.

We offer the following types of PP shock-absorbing boards:

  • rubber plates without steel base;
  • rubber plates with steel base; steel base thickness 5 mm for rubber thickness 30 to 80 mm; metal thickness 10 mm for rubber thickness over 100 mm;
  • rubber plates with steel base with prepared openings for mounting;
  • toothed profile rubber plates with steel base;
  • large rubber plates with steel base, dimensions 1500 mm × 2000 mm.

Use: receiving trays, hoppers, chutes, dump truck bodies.

RUBBER CHARACTERISTICS   DIMENSIONS
Hardness: Shore 60±5   Thickness: 30, 40, 50, 60, 75, 80, 100, 125, 150 mm
Operating temperature: up to 70 ºС   Dimensions: 500 (600,750)×1000, 500 (600,750)×1500, 1500×2000 mm
Colour: black   Metal thickness: 5-10 mm

 

  Information on PP SHOCK-ABSORBING BOARDS

 

PT SHOCK-ABSORBING BOARDS

 

 

 

Art. No.   DIMENSIONS   THICKNESS, хх
504150xx   500 mm × 1000 mm  

40, 50, 60, 75,

80, 100 (xx:10),

125 (xx:12) mm

504160xx   600 mm × 1000 mm  
504175xx   750 mm × 1000 mm  
504550xx   500 mm × 1500 mm  
504560xx   600 mm × 1500 mm  
504575xx   750 mm × 1500 mm  

 

PT shock-absorbing boards have the same characteristics as PP, but they are provided with aluminium T profile for reliable mounting. The T-profile is pre-vulcanized into the board. They are developed especially in the form of module blocks for easy and quick replacement of worn protection elements of hoppers and dump truck bodies. They are made from high-quality wear-resistant rubber and belong to the class of materials developed especially for mines and ore-dressing sector. Due to a high degree of wear resistance, they have a long service life, which ensures high performance, wear protection of production systems, and saving of time and maintenance costs. They are simple in mounting and handling, they help greatly reduce the level of noise and vibration as compared to steel protective sheets.

Use: receiving trays, hoppers, chutes, dump truck bodies.

RUBBER CHARACTERISTICS   DIMENSIONS
Hardness: Shore 60±5   Thickness: 50, 75, 80, 100, 125, 150 mm
Colour: black   Dimensions: 500 (600,750)×1000, 500 (600,750)×1500 mm
    Mounting: Aluminium T-profile

 

The mounting is made by means of a set of BOLT ТМ16, washer and lock nut with nylon insert

Art. No.   DIMENSIONS   PACKAGE
50000000   35 × 35 × 6 mm   10 pcs.

 

  Information on PT SHOCK-ABSORBING BOARDS

 

« prev  |   top  |   next »

Copyright © TRS International GmbH 2018 Impressum / Legal Disclosure Login